OPERATOR’S STATION
INSTRUMENT PANEL
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
8.
9.
Remove the service meter as follows:
a) Disconnect the service meter wires from
wiring harness (16).
b) Remove the two wing nuts and bracket
(15).
c) Slide service meter (14) out the front of the
panel.
Remove start switch as follows:
a) Disconnect five wires (17) from the back of
switch (18). Put identification on the wires
for correct installation.
b) Remove nut (19). Remove switch (18)
from the back of the panel.
5-497
