TM 5-3805-262-20
11-3 LINES AND FITTINGS MAINTENANCE (CONT)
e. Control Valve Assembly to Lift Cylinder Assemblies (cont).
REMOVAL (SHEET 2 OF 2)
(6) Loosen tube fittings at both ends of tube (7). Remove tube from loader.
(7) Loosen tube fittings at both ends of tube (8). Remove tube from loader.
(8)
Remove two nuts (9), lock washers (10), and capscrews (11). Remove four
clamps (12).
(9) Withdraw and remove tubes (13 and 14) from loader.
(10) If necessary, remove two fittings (15) and 0-rings (16) from control
valve assembly ports. Discard 0-rings.
11-52
