TM 5-3805-262-20
3-33. STARTING SYSTEM TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. STARTER CRANKS SLOWLY (UNDER 200 RPM) (Cont).
Step 11. Connect test probe cable W2 connector P1 to VTM J4.
Connect test probe cable W2 red test clip to black test clip.
Dial 89 into TEST SELECT.
Press and hold TEST until CAL appears on display then release TEST.
Wait for offset value to appear on display. Offset value should be
between -6.8 to +6.8. If it is not, STE/ICE is defective (refer to
TM 9-4910-571-12&P).
Connect test probe cable W2 red test clip to long terminal of loader
30 ampere circuit breaker and black test clip to battery negative
post .
3-280
