TM 5-3805-262-34
CLEANING (SHEET 2 OF 3)
d.
e.
LEGEND
1. Fill cap
2. O-ring
3. Capscrews (6)
4. Cover
5. Gasket
6. Sight gage
7. Drain plug
8. Hydraulic reservoir
Dry cleaning solvent P-D-680 used to clean
Wear protective goggles and gloves and
parts is toxic and flammable.
use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat and don’t smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush
with large amounts of water.
If contact with eyes is made, wash eyes
with water and get medical aid immediately.
Immerse hydraulic reservoir (8) in a bath of cleaning solvent P-D-680 and
allow to soak for 30 minutes. Agitate bath while hydraulic reservoir is
soaking.
Compressed air used for cleaning purposes will not exceed 30 psi. Use
only with effective chip guarding and personal protective equipment
(goggles/shield, gloves, etc). Failure to do so could cause serious
injury to eyes and possible blindness.
If you hurt your eyes or if a
foreign object is blown into your eyes, seek medical attention
immediately.
Remove hydraulic reservoir (8) from bath and drain all cleaning solvent from
it. Dry using compressed air.
4-277
