TM 5-3805-262-34
3-1. ENGINE MAINTENANCE (CONT)
b. EngineReplacement (Cont).
(2)
Detailed Procedure (Cont).
REMOVAL (SHEET 3 OF 4)
1
Remove two capscrews (1) and lock washers (2) from cover plate (6).
2
Remove two nuts (3), lock washers (4), capscrews (5), and cover Plate
(6).
3
Separate gasket (7) and seal (8) only if necessary for replacement.
4
Tell assistant to rotate flywheel using wrench on crankshaft pulley
capscrew until one capscrew (9) is at bottom of flywheel housing
opening.
5
Reach through flywheel housing opening and remove one capscrew (9) and
lock washer (10).
3-28
