TM 5-3805-262-34
3-1. ENGINE MAINTENANCE (CONT)
i. Rocker Arm Assembly (Cont).
INSTALLATION (SHEET 2 OF 3)
(11) Install new decal (15) on one valve cover (12), if removed.
(12) Push clip nuts (13) onto valve covers (12).
(13) Position new gaskets
(14) Install valve covers
(15) Install new grommets
(14) on cylinder heads.
(12) on cylinder heads.
(11), washers (10 and 9), and nuts (8) to secure
valve covers (12). Tighten nuts (8) to 8 to 10 lb-ft.
(16) Position one new gasket (3) on each valve cover (12).
(17) Position square tube (5) on gaskets (3).
LEGEND
1. Capscrews (3)
2. Gaskets (3)
3. Gaskets (3)
4. clamp
5. Square tube
6. Clamp
7. Breather tube
8. Nuts (6)
9. Washers (6)
10. Washers (6)
11. Grommets (6)
12. Valve covers (3)
13. Clip nuts (3)
14. Gaskets (3)
15. Decal
3-72
