TM 5-3805-262-34
INSTALLATION (SHEET 2 OF 5)
(9) Remove container from under oil tube (34) and oil hose (39). Dispose of
used engine oil properly.
NOTE
Perform following steps only if sleeves (31), compression nuts (28),
leak off tubes (29 and 30), or tubular rivet (32) were removed, other-
wise go to step (12) below.
(10) Slide compression nuts (28) and sleeves (31) onto ends of leak off tubes
(29 and 30) and tubular rivet (32).
(11) At number 6 fuel injector nozzle,
install compression nut (28) with
sleeve (31) and tubular rivet (32).
LEGEND
3-125
