TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
b. Fuel Injection Lines (Cont).
REMOVAL (SHEET 5 OF 5)
(21) Position container under oil tube (34) and oil hose (39) to catch engine
oil spillage.
(22) At fuel injection pump loosen compression nut (33).
( 23) Disconnect oil tube (34) with compression nut (33) and sleeve (35).
(24) Loosen and remove elbow (36) from fuel injection pump.
(25) At pipe tee (40) in engine block, loosen compression nut (37).
(26) Remove oil tube (34) with compression nuts (33 and 37) and sleeves (35
and 38).
(27) At air compressor, loosen and disconnect swivel end of oil hose (39).
(28) Loosen and remove oil hose (39) from pipe tee (40).
NOTE
perform following steps only if sleeves (35 and 38), compression nuts
(33 and 37), or pipe tee (40) require replacement.
(29) Loosen and remove pipe tee
(30) Remove sleeves (35 and 38)
(34) .
(40) from engine block.
and compression nuts (33 and 37) from oil tube
LEGEND
33. Compression nut
34. Oil tube
35. Sleeve
36. Elbow
37. Compression nut
38. Sleeve
39. Oil hose
40. Pipe tee
3-122
