TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
b. Fuel Injection Lines (Cont).
REMOVAL (SHEET 4 OF 5)
(15)
(16)
(17)
(18)
Tag leak off tubes (29 and 30).
Loosen leak off tube compres-
sion nuts (28) from each side
of fuel injector nozzles.
Loosen fuel injector body re-
taining nuts using 7/8 inch
Crowsfoot wrench with an ex-
tension and a ratchet wrench.
Turn fuel injector bodies
counterclockwise and remove
leak off tubes (29 and 30)
with compression nuts (28) and
sleeves (31).
NOTE
Perform following steps only
if sleeves (31), compression
nuts (28),
leak off tubes
(29 and 30), or tubular
rivet
(32) require re-
placement, otherwise go to
step (21) below.
(19) At number 6 fuel injector noz-
zle, remove compression nut
(28) with sleeve (31) and tub-
ular rivet (32).
(20) Remove sleeves (31) and com-
pression nuts (28) from leak
off tubes (29 and 30) and tub-
ular rivet (32).
3-120
