TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
d. Fuel Injection Pump (Cont) .
DISASSEMBLY (SHEET 5 OF 8)
LEG END
40. Plungers (6)
41. Lower seats (6)
42. Springs (6)
43. Control sleeves (6)
44. Upper seats (6)
45. Screws (6)
46. Gear segments (6)
47. Screw
48. Control rack
(17) Using plunger pliers, pull out six plungers
(40) with lower seats (41) then remove
springs (42) and upper seats (44).
(18) Remove control sleeves (43):
(a) Scribe control sleeve (43) and
gear segment (46).
(b) Loosen screw ( 45).
(c) Remove control sleeve (43),
gear segment (46), and screw
(45) from barrel.
(d) Repeat steps (a) through (c)
above to remove remaining
control sleeves.
3-144
