TM 5-3805-262-34
REMOVAL (SHEET 2 OF 2)
(8) Remove screw (12), nut (13), lock washer (14), and rubber cushion (15).
(9) Repeat steps (1) through (8) above to remove latch and rubber cushion
assembly (1 thru 15) from opposite side of cab.
(1) Clean all nonmetallic parts using clean, dry cloth.
Dry cleaning solvent P-D-680 used to clean parts is toxic and flammable.
Wear protective goggles and gloves and use only in a well ventilated
area. Avoid contact with skin, eyes and clothes and don’t breathe
vapors. Do not use near open flame or excessive heat and don’t smoke
when using it. Failure to do so could cause serious injury. If you be-
come dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush
with large amounts of water.
If contact with eyes is made, wash eyes
with water and get medical aid immediately.
(2) Clean all metallic parts using cleaning solvent P-D-680. Dry using clean
cloths.
3-585
