INSTALLATION
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
( l o)
LEGEND
1. Screw
2. Nut
Insert
(15).
TM 5-3805-262-34
screw (12) through rubber cushion (15); position rubber cushion
Install lock washer (14) and nut (13). Tighten nut securely.
Hook one end of spring (11) in cab wall panel.
Hook free end of spring (11) on latch (10) and insert latch through cab
wall.
Position seal (9) and bracket (8) over latch (10).
Install capscrew (6) through bracket (8) and latch (10). Install nut (7)
and tighten capscrew and nut securely.
Position seal (9) and bracket (8) on cab wall studs, then install and
tighten two nuts (5).
Position rubber cushion (4) on latch (10). Install and tighten screw (1),
lock washer (3), and nut (2).
Repeat steps (1) through (8) above to install latch and rubber cushion
assembly (1 thru 15) at opposite side of cab.
Check operation of latch and rubber cushion assembly (1 thru 15).
3. Lock washer
4. Rubber cushion
5. Nuts (2)
6. Capscrew
7. Nut
8. Bracket
9. Seal
10. Latch
11. Spring
12. Screw
13. Nut
14. Lock washer
15. Rubber cushion
3-587
