TM 5-3805-262-34
3-21. CHECKS AND ADJUSTMENTS AND FLOWMETER TESTS (CONT)
e. Flowmeter Tests (Cont).
TEST NO. 1 - HYDRAULIC PUMP LOADER SECTION (SHEET 2 OF 4)
Hydraulic system pressure is over 2000 psi and hydraulic reservoir is
pressurized with compressed air. Before loosening or disconnecting any
hydraulic hoses, lines, or fittings, operate all hydraulic control
levers to relieve hydraulic system pressure. Failure to do so could
cause serious injury or death.
If you are injured obtain medical
assistance immediately.
(2) Remove two nuts (4), lock washers (5), and capscrews (6). Remove two
clamps (7) securing inlet hose (3).
3-628