TM 5-3805-262-34
3-26. LIFT CYLINDER ASSEMBLIES MAINTENANCE (CONT)
DISASSEMBLY (SHEET 2 OF 2)
d.
Remove rod (15) with gland (14) and pistons (4 and 5) . Remove by pulling
straight out of cylinder tube (16) to prevent damaging cylinder tube.
In following step, put clean cloths between support stand and rod (15)
to prevent damaging rod.
e.
Put
5).
rod (15) eye in vise and a support stand under rod
near pistons
(4 and
f.
Remove capscrew (2) and washer (3) from rod (15). If necessary, use torque
wrench multiplier.
g.
Remove pistons (4 and 5) and associated parts (6 and 7) from rod (15).
h.
Remove gland (14) and associated parts (8 thru 13) from rod (15). If
necessary, use soft hammer.
i.
Separate pistons (4 and 5) from ring (7).
j.
Remove and discard packing assembly (6) from each piston (4 and 5).
k.
Remove and discard O-ring (8) and backup ring (9) from gland (14).
l.
Remove and discard wiper (12).
m.
Remove and discard two seals (10 and 11).
n. Remove and discard bushing (13) from gland (14).
3-738