TM 5-3805-262-34
INSTALLATION (SHEET 2 OF 2)
(d) Place rear seal lip positioning tool on crankshaft.
(e) Position rear oil seal and oil seal retainer as an assembly over rear
seal lip positioning tool.
(f) Install six capscrews to secure oil
(g) Remove rear seal lip positioning
tool.
(h) Tighten six capscrews to 35 to 42
lb-ft.
(i) Install bottom two capscrews and
tighten to 25 to 30 lb-ft.
(j) Install flywheel (page 3-59).
(k) Install flywheel housing (page
3-56).
seal retainer.
4-39
