TM 5-3805-290-10
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED
0004 00
LIGHTS
0004 00
1.
Military Light Switch.
a.
Controls operation of machine's service, blackout, parking, and instrument panel lights.
WAR N I N G
Blackout lighting system disables backup alarm, horn, and exterior lights, posing a hazard to personnel in
the area. Follow proper safety procedures when operating in blackout mode. Failure to follow this warning
may cause injury or death to personnel or damage to equipment.
b.
When operating in blackout mode, worklights, service, and directional lights are disabled. Backup alarm and horn
are also disabled in blackout mode.
c.
ALL OFF Switch. Press to turnlamps off, then press ENTER.
d.
Mode/Function Keys. Press to select desired function or mode of lighting, then press ENTER. Key will flash
when initialized, then blue indicator will come on when selected lights are on. Modes/functions are as follows:
(1)
STOP LIGHT
(2)
SER. DRIVE
(3)
PANEL BRT
(4)
PARK
(5)
PANEL DIM
(6)
B.O. DRIVE
(7)
B.O. MARKER
e.
ENTER Key. Press to activate mode/function key selected. If ENTER is not pressed within 5 seconds, switch will
reset to previous mode.
2.
Worklights Switch. Three-position rocker switch:
a.
Press top of switch to turn on front and rear
worklights.
b.
Press middle of switch to turn on front
worklights ONLY.
c.
Press bottom of switch to turn off worklights.
427-B0529
