TM 5-3805-290-23-2
INSTRUMENT CLUSTER AND TURNLAMP SWITCH REPLACEMENT - CONTINUED
0051 00
INSTRUMENT CLUSTER REMOVAL
0051 00
1.
Remove seven screws (1) securing instrument cluster
(2) to panel (3).
CAU T I ON
Ensure wiring is not damaged while
replacing the instrument cluster.
2.
Remove cover (4) and screw (5) from turnlamp switch
handle (6).
3.
Remove turnlamp switch handle (6) from turnlamp
switch (7).
4.
Pull instrument cluster (2) outward from panel (3).
427-B1084
5.
Loosen screw (8) and disconnect wiring harness (9)
from rear of instrument cluster (2).
6.
Remove three nuts (10) and lockwashers (11) from
turnlamp switch (7). Discard lockwashers.
7.
Disconnect turnlamp switch (7) from instrument clus-
ter (2).
8.
Remove instrument cluster (2) from machine.
427-B1085
0051 00-2