TM 5-3805-290-23-2
HYDRAULIC OIL TEMPERATURE SENSOR REPLACEMENT - CONTINUED
0070 00
REMOVAL
1.
Disconnect wiring harness (1) from hydraulic oil temperature sensor (2).
2.
Remove hydraulic oil temperature sensor (2) and O-ring (3) from hydraulic tank (4). Discard O-ring.
427-B0193
INSTALLATION
1.
Lubricate new O-ring (3) with a thin coat of clean oil, install O-ring on hydraulic oil temperature sensor (2), and install
assembly on hydraulic tank (4). Tighten sensor to 15 4 lb-ft (20 5 Nm).
2.
Connect wiring harness (1) to hydraulic oil temperature sensor (2).
3.
Check oil level and fill hydraulic tank with oil (WP 0137 00).
4.
Run engine until normal operating temperature is reached (TM 5-3805-290-10).
5.
Operate machine using all hydraulic functions (TM 5-3805-290-10).
6.
Shut down engine (TM 5-3805-290-10).
7.
Check for hydraulic oil leaks.
8.
Install left-side covers (WP 0110 00).
END OF WORK PACKAGE
0070 00-2