8
TM 5-3805-290-23-2
FUEL INJECTOR ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation, Testing
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Direct support
Compound, antiseize (Item 13, WP 0206 00)
Rag, wiping (Item 41, WP 0206 00)
Test Equipment
Seat washer
Adapter, injector nozzle (Item 3, WP 0205 00)
Can, screw cap (Item 24, WP 0205 00)
Personnel Required
Coupling assembly, hose (Item 25, WP 0205 00)
MOS 62B, Construction Equipment Repairer
Pumping unit, hydraulic, hand-driven (Item 66, WP
References
TM 5-3805-290-10
Tube assembly, metal (Item 98, WP 0205 00)
Tools and Special Tools
Tool kit, general mechanic's (Item 96, WP 0205 00)
Equipment Conditions
Shop equipment, machine shop, field maintenance,
Fuel injector lines disconnected (WP 0030 00)
heavy, less power (Item 76, WP 0205 00)
Drawings Required
Wrench, torque (Item 107, WP 0205 00)
TM 5-3805-290-23P, Figure 17
Materials/Parts
Estimated Time to Complete Task
Cap set, protective (Item 8, WP 0206 00)
2.5 hr
Calibration fluid, diesel (Item 7, WP 0206 00)
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames, or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
To prevent injury to personnel, wear protective eye covering and gloves.
CAU T I ON
Always cap lines and hoses and/or plug openings when removing fuel injector nozzle(s) and fuel
line(s). Contaminants may enter system and cause premature failure.
