TM 5-3805-291-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
Table 1. MID 036 Engine Control - Continued.
TROUBLE-
CID
SHOOTING
FMI
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
Incorrect Engine
This code is generated when the engine ECM detects one of the
0267 02
Shutdown Switch Inputs
following conditions:
Both of the switch inputs from the engine
shutdown switch are in the open state.
Both of the switch inputs from the engine
shutdown switch are in the closed state.
If both of the switch inputs from the engine shutdown switch change to
the same state and the engine is running, the engine will continue to
run. If both of the switch inputs from the engine shutdown switch
change to the same state and the engine is not running, the engine will
not start.
Atmospheric Pressure
This code is generated when the engine ECM detects a signal voltage
0274 03
Open/Short to +Battery
that is above normal. When this code is generated, the code is logged,
the engine ECM will use the default value for atmospheric pressure,
and the engine power is derated.
Atmospheric Pressure
This code is generated when the engine ECM detects a signal voltage
0274 04
Short to Ground
that is below normal. When this code is generated, the code is logged,
the engine ECM will use the default value for atmospheric pressure,
and the engine power is derated.
Right Turbo Inlet
This code is generated when the engine ECM detects a signal voltage
0275 03
Pressure Open/Short to
that is above normal. When this code is generated, the code is logged,
+Battery
the engine ECM flags turbocharger inlet pressure as invalid data and a
default value is used, and the engine power will be derated.
Right Turbo Inlet
This code is generated when the engine ECM detects a signal voltage
0275 04
Pressure Short to Ground that is below normal. When this code is generated, the code is logged,
the engine ECM flags turbocharger inlet pressure as invalid data and a
default value is used, and the engine power will be derated.
Engine Cooling Fan
This code is generated when the engine ECM detects an open circuit or
0291 05
Solenoid Open Circuit
a short to +Battery condition in the circuit for the engine cooling fan
solenoid. When this code is generated, the engine ECM logs the
diagnostic code. While the condition is present, the engine ECM loses
the ability to control the engine cooling fan and overheating or over-
cooling of the engine may occur.
Engine Cooling Fan
This code is generated when the engine ECM detects a short to ground
0291 06
Solenoid Short to
condition in the circuit for the engine cooling fan solenoid. When this
Ground
code is generated, the engine ECM logs the diagnostic code. While the
condition is present, the engine ECM loses the ability to control the
engine cooling fan and overheating or over-cooling of the engine may
occur.
0007 00-10
