TM 5-3805-291-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
Table 1. MID 036 Engine Control - Continued.
TROUBLE-
CID
SHOOTING
FMI
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
Unable to Communicate
This code is generated when the engine ECM detects one of the
0296 09
with Transmission ECM
following conditions:
Communication with th transmission can-
e
not be established within three seconds after
engine ECM power up.
After communication with the transmission
has been established, communication stops
for one second.
When this code is generated, the engine ECM will log the diagnostic
code and all transmission features that rely on the data link are disabled.
Transmission ECM
This code is generated when the engine ECM for the engine is not
0296 12
Failed
receiving complete information from the transmission engine ECM.
When this code is generated, the code is logged and all features that
depend on the Data Link will be disabled.
Secondary Engine Speed This code is generated when the signal from the secondary engine
0342 08
Signal Abnormal
speed/timing sensor is intermittent or the signal has been lost. The code
is logged. If a valid signal is not received from the secondary engine
speed/timing sensor, the engine ECM will default to the primary engine
speed/timing sensor. The engine will shut down only if the signals from
the primary engine speed/timing sensor and the secondary engine
speed/timing sensor are abnormal.
Unable to Communicate
This code is generated when the engine ECM loses communication with
0596 09
with Implement ECM
the implement ECM. When this code is generated, the code is logged
and all features that depend on input from the implement ECM will be
disabled. This code has no effect on engine performance.
0007 00-11
