TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0794 04
427-C1631
N OT E
The following test procedure may create other diagnostic codes. Ignore
these created diagnostic codes and clear these diagnostic codes when
original diagnostic code is corrected. Ensure diagnostic code CID 0794
FMI 04 is active before performing this procedure.
1. Check switch.
(a) Turn engine start and battery
disconnect switches to OFF position
(TM 5-3805-291-10).
(b) Disconnect wiring harness from
secondary steering oil pressure switch
(WP 0088 00).
(c) Turn engine start and battery
1. If CID 0794 FMI 04 has been replaced
disconnect switches to ON position
by CID 0794 FMI 03, go to Test 3.
(TM 5-3805-291-10).
2. If CID 0794 FMI 04 is still active, go to
Test 2.
2. Check wiring harness.
(a) Turn engine start and battery
disconnect switches to OFF position
(TM 5-3805-291-10).
(b) Wiring harness remains disconnected
from switch.
(c) Disconnect wiring harness
connector(s) from powertrain ECM
(WP 0063 00).
