TM 5-3805-291-23-1
STEERING SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0016 00
ARTICULATED HITCH ADJUSTMENT - CONTINUED
Lower Hitch Adjustment - Continued
3.
Install driver plate, 2 1/4 bolts and nuts. Use torque
wrench in order to determine the amount of torque that
is needed in order to rotate the bearing cones. As
required, adjust the number of shims in order to
and 200 lb-in. (22.6 Nm).
4.
Remove driver plate, nuts, and bolt.
5.
Install the proper amount of shims.
6.
Install the lower cap (32), upper cap (30), and eight
bolts (31).
427-C1990
Upper Hitch adjustment
1.
Install the original shim pack (33).
427-C1991
0016 00-15