TM 5-3805-291-23-1
STEERING SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0016 00
ARTICULATED HITCH ADJUSTMENT - CONTINUED
Upper Hitch Adjustment - Continued
N OT E
Install upper cap and lower cap in the original radial location.
2.
Install upper cap (34). Install three bolts (36) that are
equally spaced at 120 degree intervals. The torque for
bolts is 75 15 lb-ft (100 20 Nm).
3.
Install driver plate, 1/4 in. bolt, and nuts. Use a torque
wrench and tooling in order to determine the amount
of torque that is needed in order to rotate the bearing
cones. As required, adjust the number of shims in
Nm) and 120 lb-in. (13.6 Nm).
4.
Remove driver plate, nuts, and bolts.
427-C1992
5.
Install the proper amount of shims.
6.
Install the lower cap (35), upper cap (34), and six bolts
(36).
427-C1993
END OF WORK PACKAGE
0016 00-16
