TM 5-3805-291-23-1
FUEL PRIMING PUMP REPLACEMENT - CONTINUED
0038 00
INSTALLATION
N OT E
Lubricate new O-rings and preformed packings with clean fuel before installation.
1.
Install new preformed packing (22), new O-ring (21), and bushing (20) on fuel priming pump (3).
2.
Install two new preformed packings (19) and plugs (18) on fuel priming pump (3).
3.
Install fuel priming pump (3), brackets (12 and 17), six mounts (16), two spacers (15), washers (14), and screws (13) on
engine.
4.
Install switch (11) and nut (10) on bracket (12).
5.
Install spacer (9), two mounts (8), washer (7), and screw (6).
6.
Install two new O-rings (5) in hose assemblies (4).
7.
Connect two hose assemblies (4) to fuel priming pump (3).
8.
Connect wiring harnesses (2 and 1) to fuel priming pump (3).
9.
Install fuel primary filter and water separator (WP 0035 00).
10.
Check fuel level (TM 5-3805-291-10).
11.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
12.
Shut down engine and check for leaks (TM 5-3805-291-10).
END OF WORK PACKAGE
0038 00-3/(0038 00-4 Blank)
