TM 5-3805-291-23-1
THROTTLE PEDAL AND THROTTLE POSITION SENSOR MAINTENANCE - CONTINUED
0039 00
REMOVAL
Throttle Pedal
1.
Remove four bolts (1) and washers (2) from throttle
pedal assembly (3).
2.
Disconnect throttle position sensor (4) from wiring
harness (5).
3.
Remove throttle pedal assembly (3) from machine.
Throttle Position Sensor
Remove two screws (6) from throttle position sensor
(4) and remove sensor from throttle pedal assembly (3).
427-C0187
N OT E
The angle (Y) of the throttle pedal to the
floor is 35 degrees. The maximum travel
(Z) of the throttle pedal is 17 degrees.
DISASSEMBLY
1.
Remove grommet (7) from throttle pedal assembly
(3).
2.
Remove two snap rings (8), pin (9), and roller (10)
from throttle pedal assembly (3).
3.
Remove parts kit (11) from throttle pedal assembly (3)
in accordance with instruction provided with kit.
4.
Remove pedal (12) from throttle pedal assembly (3).
427-C0185
5.
Remove screw (13) and clip (14) from throttle pedal
assembly (3).
0039 00-2