4
TM 5-3805-291-23-1
FUEL PRIMING PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Rag, wiping (Item 35, WP 0233 00)
Unit
Tag, marker (Item 43, WP 0233 00)
Tools and Special Tools
O-ring (3)
Preformed packing (3)
Tool kit, general mechanic's, automotive (Item 90,
Personnel Required
Shop equipment, automotive maintenance and
MOS 62B, Construction Equipment Repairer
repair: organizational maintenance, common no.
1 (Item 70, WP 0232 00)
References
TM 5-3805-291-10
Materials/Parts
Equipment Conditions
Cap set, protective (Item 6, WP 0233 00)
Fuel primary filter and water separator removed
Cleaning compound, solvent, type III (Item 7, WP
Drawings Required
Diesel fuel, DF-1 (Item 10, WP 0233 00)
TM 5-3805-291-23P, Figure 26
Fuel oil, diesel, DF-2 (Item 11, WP 0233 00)
Estimated Time to Complete Task
Fuel, turbine, aviation (Item 12, WP 0233 00)
2.0 hr
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames, or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses and wires prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
