TM 5-3805-292-23
0039
INSTALLATION CONTINUED
7. Tighten three nuts (Figure 13, Item 1).
8. Loosen bolt (Figure 13, Item 4) on fuel injection pump (Figure 13, Item 3), install shim (Figure 13, Item 2), then
tighten bolt.
Figure 13. Pinning Fuel Injection Pump Shaft.
0039
9. Tighten nut (Figure 14, Item 2) on fuel injection pump gear (Figure 14, Item 1) to an initial torque of 12 to 15 lb-
ft (16 to 20 Nm). Loosen nut and tighten to 63 to 67 lb-ft (85 to 91 Nm).
Figure 14. Fuel Injection Pump Gear Nut.
0039