4
TM 5-3805-292-23
FIELD MAINTENANCE
-
A/C RECEIVER/DRYER REPLACEMENT
0
092
REMOVAL, CLEANING AND INSPECTION, INSTALLATION
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
0
0
Tool Kit, General Mechanic's (WP 0178, Item
O-Ring (2)
0
33)
0
References
0
Reclaimer, Refrigerant R-134a (WP 0178,
TM 5-3805-292-23P, Figure 61
Item 28)
0
0
Tool Kit, Service Refrigeration Ordnance (WP
Equipment Conditions
0
0178, Item 34)
0
Machine parked on level ground (TM 5-3805-
Materials/Parts
292-10)
0
0
Parking brake engaged (TM 5-3805-292-10)
Cap Set, Protective (WP 0179, Item 2)
0
0
Floor plate removed (TM 5-3805-292-10)
Cleaning Compound, Solvent, Type III (WP
0
Refrigerant recovered from A/C system
0179, Item 3)
0
Oil, Lubricating, Refrigerant Compressor: Syn-
0
Access cover removed (TM 5-3805-292-10)
thetic Ester (WP 0179, Item 18)
0
0
Rag, Wiping (WP 0179, Item 19)
0
Estimated Time to Complete
0
Refrigerant, R-134a (WP 0179, Item 20)
0
2.3 Hr
0
0
WARN I N G
Contact with refrigerant can cause frostbite. Keep hands and face away to prevent
personal injury.
Protective face shield and gloves must always be worn when refrigerant lines are opened,
even if the gauges indicate system is empty.
Always use caution when disconnecting fititngs. Slowly loosen the fitting in a well-
ventilated area.
Do not smoke when servicing A/C or wherever refrigerant gas may be present.
Failure to follow these warnings may result in injury or death to personnel.
C AU T I O N
Cap all A/C hoses and fittings during removal to protect against contamination. Failure to follow
this caution may result in equipment damage.
0092-1