TM 5-3805-292-23
0126
INSTALLATION CONTINUED
11. Remove wooden block (Figure 14, Item 2) from machine.
12. Position buckle (Figure 14, Item 3) on machine.
13. Install washer (Figure 14, Item 2) and bolt (Figure 14, Item 4) on seat assembly (Figure 14, Item 1).
14. Position clamp (Figure 14, Item 7) on seat assembly (Figure 14, Item 1).
15. Install nut (Figure 14, Item 6) and bolt (Figure 14, Item 5) on clamp (Figure 14, Item 7).
16. Connect electrical connector (Figure 14, Item 8).
FOLLOW-ON TASKS
000126
1. Close ROPS (WP 0134).
2. Verify correct operation of machine (TM 5-3805-292-10).
END OF TASK
END OF WORK PACKAGE
0126-11/(12 blank)
