TM 5-3805-292-23
0151
REMOVAL
000151
N OT E
Tag wires and connectors prior to removal to aid in installation.
Remove tiedown straps.
1. Position rubber boot (Figure 1, Item 3) aside. Remove nut (Figure 1, Item 1) and wire (Figure 1, Item 2) from
fuel injection pump (Figure 1, Item 4).
2. Position rubber boot (Figure 1, Item 7) aside. Remove nut (Figure 1, Item 5) and wire (Figure 1, Item 6) from
fuel injection pump (Figure 1, Item 4).
3. Disconnect engine wiring harness (Figure 1, Item 9) from connector (Figure 1, Item 10) and remove connector
(Figure 1, Item 10) from fuel injection pump (Figure 1, Item 4).
4. Disconnect fuel injection pump harness (Figure 1, Item 8) from engine and remove fuel injection pump harness
(Figure 1, Item 8) from machine.
Figure 1. Fuel Injection Pump Wiring Harness Removal.
0151
END OF TASK
