TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 12. Test Ground Circuit to
Kickout System Will Not
Bucket Kickout Position Sensor.
Operate or Operates
1. Turn ignition switch and battery
Improperly - Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector LE-C3 from
lift kickout position sensor
(WP 0012, Figure 235).
3. Disconnect connector LE-C18
from carry kickout position sensor
(WP 0012, Figure 236).
4. Remove two tiedown straps
(Figure 13, Item 3) from mounting
bracket (Figure 13, Item 1) and
wiring harness (Figure 13, Item 2).
Discard tiedown straps.
5. Disconnect connector N-C3 from
fork kickout position sensor
(WP 0012, Figure 234).
6. Disconnect connector N-C2 from
bucket kickout position sensor
(WP 0012, Figure 233).
7. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Proceed to Test Step 14.
between connector N-C2
Resistance Greater Than 5.0 Ohms
terminal C (WP 0012, Figure 233)
Proceed to Test Step 13.
and ground.
0155-20
