TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Disconnect connector C-C22 from
Kickout System Will Not
pilot valve connector (WP 0012,
Operate or Operates
Figure 232).
Improperly - Continued
5. Remove console instrument panel
for access to wiring harness
connectors (WP 0264).
6. Disconnect connector C-C6
(WP 0012, Figure 70) from
implement disable switch
(WP 0012, Figure 71).
7. Disconnect connector C-C37
(WP 0012, Figure 241) from
kickout switch (WP 0012,
Figure 242).
8. Disconnect connector C-C38
(WP 0012, Figure 239) from
bucket/fork switch (WP 0012,
Figure 240).
9. Using digital multimeter
Continuity at Any Test Point
(WP 0174), test for continuity at
Replace lower cab wiring harness
connector C-C37 (WP 0012,
(WP 0291).
Figure 241) as follows:
Proceed to Test Step 60.
a. Between terminal 2 and
No Continuity at Any Test Point
terminal 7.
Proceed to step 10.
b. Between terminal 2 and
ground.
c. Between terminal 3 and
terminal 7.
10. Using digital multimeter
Continuity at Any Test Point
(WP 0174), test for continuity at
Replace lower cab wiring harness
connector C-C38 (WP 0012,
(WP 0291).
Figure 239) as follows:
Proceed to Test Step 60.
a. Between terminal 1 and
No Continuity at Any Test Point
terminal 7.
Proceed to step 11.
b. Between terminal 2 and
terminal 7.
c. Between terminal 3 and
terminal 7.
0155-37