TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
Kickout System Will Not
Continuity at Any Test Point
(WP 0174), test for continuity at
Operate or Operates
Replace kickout positioner wiring
connector N-C1 (WP 0012,
Improperly - Continued
harness (WP 0297).
Figure 238) as follows:
Proceed to Test Step 60.
a. Between terminal 1 and all
No Continuity at Any Test Point
other terminals in connector
Proceed to Test Step 31.
N-C1.
b. Between terminal 1 and
ground.
c. Between terminal 2 and all
other terminals in connector
N-C1.
d. Between terminal 2 and
ground.
e. Between terminal 5 and all
other terminals in connector
N-C1.
f. Between terminal 5 and
ground.
g. Between terminal 6 and all
other terminals in connector
N-C1.
h. Between terminal 6 and
ground.
Figure 19. Tiedown Straps.
0155