TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
11. Touch magnet to back side of carry
Kickout System Will Not
kickout position sensor (Figure 22,
Operate or Operates
Item 1) and remove magnet.
Improperly - Continued
Figure 22. Carry Kickout Position Sensor.
0155
12. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
13. Remove kickout fuse
(TM 5-3805-298-10).
14. Using digital multimeter
Resistance 5.0 Ohms or Less - Install
(WP 0174), measure resistance
kickout fuse (TM 5-3805-298-10).
between kickout fuse terminals.
Proceed to Test Step 34.
Resistance Greater Than 5.0 Ohms -
Replace carry kickout position sensor
(WP 0297).
Replace kickout fuse
(TM 5-3805-298-10).
Proceed to Test Step 60.
