TM 5-3805-298-23-2
0166
STEERING PISTON PUMP LOW PRESSURE STANDBY TEST CONTINUED
1. Remove right lower cab access panels (WP 0347).
2. Apply sealant on threads of 870 psi (6,000 kPa) gauge (Figure 11, Item 1) and install female coupler
(Figure 11, Item 2) on gauge.
3. Apply sealant on both threads of 8C-7575 hex nipple (Figure 11, Item 4) from pressure gauge kit.
4. Install two 6V-4142 unvalved nipples (Figure 11, Item 3) from pressure gauge kit on 8C-7575 hex nipple
(Figure 11, Item 4).
5. Connect female coupler (Figure 11, Item 2) on 870 psi (6,000 kPa) gauge (Figure 11, Item 1) assembly to
6V-4142 unvalved nipple (Figure 11, Item 3).
6. Connect hose 177-7861 (Figure 11, Item 5), from pressure gauge kit, to other 6V-4142 unvalved nipple
(Figure 11, Item 3).
Figure 11. 870 psi (6,000 kPa) Gauge Assembly.
0166