TM 5-3805-298-23-2
0166
STEERING HIGH PRESSURE STALL TEST
000166
CAUTION
Do not perform this procedure unless directed here from troubleshooting or a repair
procedure. Failure to follow this caution may result in an improper diagnosis.
1. Remove right lower cab access panels (WP 0347).
2. Apply sealant on threads of 3,600 psi (25,000 kPa) gauge (Figure 13, Item 1) and a 6V-3966 valved nipple
(Figure 13, Item 3) from pressure gauge kit.
3. Install adapter (Figure 13, Item 2) on 3,600 psi (25,000 kPa) gauge (Figure 13, Item 1).
4. Install 6V-3966 valved nipple (Figure 13, Item 3) on adapter (Figure 13, Item 2).
5. Connect hose 177-7861 (Figure 13, Item 4), from pressure gauge kit, to 6V-3966 valved nipple
(Figure 13, Item 3).
Figure 13. 3,600 psi (25,000 kPa) Gauge Assembly.
0166
