TM 5-3805-298-23-2
0166
STEERING PISTON PUMP LOW PRESSURE STANDBY TEST CONTINUED
7. Remove cap (Figure 12, Item 1) from fitting (Figure 12, Item 2) on pressure reducing valve (Figure 12, Item 3).
8. Connect hose (Figure 11, Item 5) to fitting (Figure 12, Item 2) on pressure reducing valve (Figure 12, Item 3).
Figure 12. Pressure Reducing Valve.
0166
9. Turn battery disconnect switch to ON position and start engine (TM 5-3805-298-10).
10. Run engine at high idle (2,450 rpm) (TM 5-3805-298-10). Do not move steering wheel.
11. Pressure should be 590 30 psi (4,065 205 kPa).
12. Disconnect hose (Figure 11, Item 5) from fitting (Figure 12, Item 2) on pressure reducing valve
(Figure 12, Item 3).
13. Install cap (Figure 12, Item 1) from fitting (Figure 12, Item 2) on pressure reducing valve (Figure 12, Item 3).
14. Install right lower cab access panels (WP 0347).
END OF TASK
