TM 5-3805-298-23-2
0200
FUEL PRIME PUMP AND BASE REMOVAL CONTINUED
1. Remove fuel prime pump toggle switch (see procedure in this work package).
2. Remove primary fuel filter (WP 0219).
NOTE
Cap or plug hose ends and fittings during removal.
Tag and mark hoses and fittings to aid installation.
Note hose routing to aid installation.
Use container to catch any fluid that may drain from system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
3. Loosen two clamps (Figure 4, Item 1) and remove two hoses (Figure 4, Item 2) from elbow fittings
(Figure 4, Item 3).
Figure 4. Clamps and Hoses.
0200