TM 5-3805-298-23-2
0200
FUEL PRIME PUMP AND BASE REMOVAL CONTINUED
NOTE
Cap or plug ports during removal.
Tag and mark plugs to aid installation.
Use container to catch any fluid that may drain from system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
8. Remove two plugs (Figure 6, Item 3) and O-rings (Figure 6, Item 2) from fuel prime pump and base (Figure 6,
Item 1). Discard O-rings.
NOTE
Three washers at rear of fuel prime pump and base will fall when bolts are removed.
9. Remove three bolts (Figure 6, Item 5), six washers (Figure 6, Item 4) and fuel prime pump and base (Figure 6,
Item 1) from machine.
Figure 6. Fuel Prime Pump and Base.
0200