TM 5-3805-298-23-2
0200
FUEL PRIME PUMP AND BASE REMOVAL CONTINUED
10. Remove eight isolation mounts (Figure 7, Item 1), bracket (Figure 7, Item 2), and three spacers (Figure 7,
Item 3) from fuel prime pump and base (Figure 7, Item 4).
Figure 7. Fuel Prime Pump and Base Isolation Mounts.
0200
END OF TASK
CLEANING AND INSPECTION
000200
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
FUEL PRIME PUMP AND BASE INSTALLATION
000200
1. Install three spacers (Figure 7, Item 3), eight isolation mounts (Figure 7, Item 1), and bracket (Figure 7, Item 2)
on fuel prime pump and base (Figure 7, Item 4).
