TM 5-3805-298-23-2
0200
FUEL PRIME PUMP AND BASE INSTALLATION CONTINUED
NOTE
Remove cap or plugs from hose ends.
Install hoses as noted during removal.
8. Install two hoses (Figure 10, Item 2) on elbow fittings (Figure 10, Item 3) and tighten two clamps (Figure 10,
Item 1).
9. Install primary fuel filter (WP 0219).
10. Install fuel prime pump toggle switch (see procedure in this work package).
Figure 10. Clamps and Hoses.
0200
END OF TASK