4
TM 5-3805-298-23-4
FIELD MAINTENANCE
-
DEAD ENGINE LOWERING CONTROL VALVE REPLACEMENT
0377
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tool Kit, General Mechanic's
References
0
(WP 0431, Item 162)
WP 0172
0
0
Gloves, Rubber
Equipment Conditions
(WP 0431, Item 63)
0
0
Goggles
Machine parked (TM 5-3805-298-10)
0
0
Hydraulic system pressure released
Materials/Parts
0
0
Cap Set, Protective (WP 0430, Item 4)
Hydraulic tank drained (WP 0368)
0
0
Rag, Wiping (WP 0430, Item 27)
0
Estimated Time to Complete
Tag, Marker (WP 0430, Item 35)
0
0
2.5 Hr
O-ring, 6V-8397 (WP 0432, Item 140) (4)
0
0
REMOVAL
000377
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut
down and hydraulic system pressure has been relieved. Tighten all connections before
applying pressure. Escaping hydraulic fluid under pressure can penetrate the skin,
causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
Wear protective clothing and eye covering.
Failure to follow these warnings may result in injury to personnel.
NOTE
Note routing of hose to aid installation.
Tag and mark hose and fittings to aid installation.
Cap or plug hose ends and fittings to protect against contamination.
0377-1
