TM 5-3805-298-23-4
0377
INSTALLATION
000377
NOTE
Install fittings as noted during removal.
Remove caps and plugs and install hose as noted during removal.
1. If removed, install bracket (Figure 1, Item 3), two washers (Figure 1, Item 4), and bolts (Figure 1, Item 5) on
machine.
2. Install two new O-rings (Figure 1, Item 10) and fittings (Figure 1, Item 9) on adapters (Figure 1, Item 11).
3. Install dead engine lowering control valve (Figure 1, Item 12), four washers (Figure 1, Item 1), and bolts
(Figure 1, Item 2) on bracket (Figure 1, Item 3).
4. Install two new O-rings (Figure 1, Item 8), hose (Figure 1, Item 6), and tube nuts (Figure 1, Item 7) on fittings
(Figure 1, Item 9).
END OF TASK
FOLLOW-ON TASKS
000377
1. Fill hydraulic tank (WP 0368).
2. Verify correct operation of machine (TM 5-3805-298-10).
END OF TASK
END OF WORK PACKAGE
0377-3/(4 blank)