TM 5-3805-298-23-4
0377
REMOVAL CONTINUED
1. Loosen two tube nuts (Figure 1, Item 7) and remove two hoses (Figure 1, Item 6) and O-rings (Figure 1, Item 8)
from fittings (Figure 1, Item 9). Discard O-rings. Position hoses aside.
2. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 1), and dead engine lowering control valve
(Figure 1, Item 12) from bracket (Figure 1, Item 3).
3. Remove two fittings (Figure 1, Item 9) and O-rings (Figure 1, Item 10) from adapters (Figure 1, Item 11).
Discard O-rings.
NOTE
Bracket removal is necessary only if bracket is damaged.
4. Remove two bolts (Figure 1, Item 5), washers (Figure 1, Item 4), and bracket (Figure 1, Item 3) from machine.
Figure 1. Dead Engine Lowering Control Valve.
0377
END OF TASK
CLEANING AND INSPECTION
000377
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK