TM 5-3805-298-23-4
0378
INSTALLATION
000378
NOTE
Remove caps or plugs from fittings and ports on differential lock valve prior to installation.
Install fittings as noted during removal.
1. Install three new O-rings (Figure 4, Item 4) on differential lock solenoid (Figure 4, Item 6).
2. Install differential lock solenoid (Figure 4, Item 6) and two bolts (Figure 4, Item 5) on differential lock valve
(Figure 4, Item 7).
3. Install three new O-rings (Figure 4, Item 3) and elbow fittings (Figure 4, Item 2) on differential lock valve
(Figure 4, Item 7) and tighten jam nuts (Figure 4, Item 1).
NOTE
Route wiring harness and install wiring harness connector as noted during removal.
Install tiedown straps as noted during removal.
4. Install differential lock valve (Figure 5, Item 6), two washers (Figure 5, Item 4), and bolts (Figure 5, Item 5) on
machine.
5. Connect front frame wiring harness connector (Figure 5, Item 1) on differential lock solenoid (Figure 5, Item 2).
6. Install new tiedown strap (Figure 5, Item 3) on differential lock solenoid (Figure 5, Item 2) and front frame wiring
harness (Figure 5, Item 7).
Figure 5. Front Frame Harness Connector.
0378
