TM 5-2420-231-23-1
0013
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
013
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9. Turn ignition switch to the off posi-
Engine Does Not Crank or
tion (TM 5-2420-231-10) and dis-
Cranks Slowly - Continued
connect batteries (WP 0157).
10. Disconnect transmission control-
ler wiring harness connector (Fig-
ure 8, Item 1) from transmission
controller (Figure 8, Item 2).
Figure 8. Transmission Controller and Connector.
0013
11. Remove clutch relay (WP 0007,
Figure 118) from front console wir-
ing harness connector.
12. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between transmis-
Proceed to step 13.
sion controller wiring harness
Resistance Greater Than 5.0 Ohms -
connector (WP 0007, Figure 20)
Replace front console wiring harness
terminal A1 and shift lever wiring
(WP 0162).
harness connector terminal 8
Proceed to Test Step 7.
(WP 0007, Figure 21). Resistance
should be 5.0 ohms or less.