TM 5-2420-231-23-2
0160
REMOVAL CONTINUED
NOTE
Tag and mark wires to aid in installation.
9. Remove locknut (Figure 6, Item 8), bolt (Figure 6, Item 7), and relay mount (Figure 6, Item 6) from
mounting plate (Figure 6, Item 9). Discard locknut.
10. Position cover (Figure 6, Item 10) aside.
11. Remove two nuts (Figure 6, Item 1), lockwashers (Figure 6, Item 2), fuse (Figure 6, Item 3), and cable
(Figure 6, Item 4) from fuse block (Figure 6, Item 5). Discard lockwashers.
12. Remove mounting plate (Figure 6, Item 9) from machine.
Figure 6. Relay Mount.
0160
13. Remove nut (Figure 7, Item 18), washer (Figure 7, Item 19), and bus bar (Figure 7, Item 20) from fuse block
(Figure 7, Item 4) and relay (Figure 7, Item 17).
14. Remove two locknuts (Figure 7, Item 9), four washers (Figure 7, Item 10), two bolts (Figure 7, Item 11), and
controller (Figure 7, Item 8) from mounting plate (Figure 7, Item 13). Discard locknuts.
15. Remove two locknuts (Figure 7, Item 12), four washers (Figure 7, Item 14), two bolts (Figure 7, Item 15),
spacer (Figure 7, Item 16), and relay (Figure 7, Item 17) from mounting plate (Figure 7, Item 13). Discard
locknuts.
16. Remove locknut (Figure 7, Item 5), two washers (Figure 7, Item 6), and bolt (Figure 7, Item 7) from fuse block
(Figure 7, Item 4). Discard locknut.
17. Remove locknut (Figure 7, Item 2), washer (Figure 7, Item 3), fuse block (Figure 7, Item 4), and bolt (Figure 7,
Item 1) from mounting plate (Figure 7, Item 13). Discard locknut.
