8
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
TOOL QUICK-COUPLER CYLINDER AND PINS REPLACEMENT
0284
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Tool Kit, General Mechanic's
Lockwasher (3)
0
0
(WP 0376, Item 117)
O-ring (3)
0
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
References
Trestle, 10-Ton (WP 0376, Item 120)
0
0
Materials/Parts
WP 0374 (Group Number 0808)
0
Cap Set, Protective, Dust and Moisture
0
Equipment Conditions
(WP 0375, Item 4)
Machine parked (TM 5-2420-231-10)
Grease, Automotive and Artillery (GAA)
0
0
Front end loader bucket removed
(WP 0375, Item 14)
0
(TM 5-2420-231-10)
Rag, Wiping (WP 0375, Item 25)
0
Tag, Marker (WP 0375, Item 33)
Estimated Time to Complete
0
Locknut (2)
0.7 hr
0
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0284-1