TM 5-2420-231-23-3
0289
CLEANING AND INSPECTION
0289
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0289
1. Install two rubber pads (Figure 3, Item 1) and six new locknuts (Figure 3, Item 2) on stabilizer pad
(Figure 3, Item 3).
Figure 3. Stabilizer Pad and Rubber Pads.
0289
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may result in injury or death to personnel.
NOTE
Stabilizer pad assembly weighs 120 lb (55 kg).
2. Attach sling and lifting device to stabilizer arm.
3. With assistance, support stabilizer arm.
